The electro fieldmeter EFM 023 is very user friendly due to its compact design and one touch operating. The dissipative housing of the unit is EPA - compatible.
The EFM 023 is conform to the EFM 022 plus an analoque interface ± 1V. By using our USB 110 you can connect it to a PC with USB interface.
Menu driven selection of measurement distance
Voltage potentials can be directly measured for preselected measurement distances, thus would avoid recalculation. 5 measurement distances are available, which makes it even possible for your most convenient handling in problematic areas.
The hold function keeps the actual reading in memory, e.g. after obtaining measurements in spots where the on-line reading of display is not possible.
Charge Plate - function
You need our Charge-Plate Set.
Mount the plate electrodes on top of the EFM 022. Than charge the plate with the HV-Converter higher ±1.100V. By discharging the plate an internal timer starts at ±1.000V and stops at ±100V. The positive / negative discharge time will be shown at the display.
No zero drift
Therefore a zero adjustment is not needed before each measurement.
|distance 1cm:||0 to 10kV|
|distance 2cm:||0 to 20kV|
|distance 5cm:||0 to 50kV|
|distance 10cm:||0 to 100kV|
|distance 20cm:||0 to 200kV|
|Dimensions:||122mm x 70mm x 26mm ( L x W x H )|
|Weight:||approx. 130 g (without battery)|
|Power supply:||9V Alkali battery IEC 6F22|
|2-line alphanumeric LC-display with 12 digits each
The measurement distance in cm will be displayed in the first line, the voltage potential will be indicated in volts in the second line.
|Scope of delivery:|